1 | Macintosh users | ||
| START HERE | ||
|
|
|
|
|
|
|
|
Macintosh OS 9, OS X
This side of the poster is for
Macintosh users only.
Follow the steps on this poster in order.
2 Unpack the device | 3 | Attach the front panel cover |
| 4 | Load plain white paper | |
Macintosh | a | Remove the adhesive backing | a | b | a | b |
|
|
|
| |||
|
| from the front panel cover. |
|
|
|
|
b Raise the lid of the HP PSC. Place the front panel cover into the recess and stick it into place.
The HP PSC will not work until you attach the front panel cover!
5 Connect the USB cable | 6 Connect the power cords | 7 Turn on the HP PSC |
If you have an iMac, the USB |
| c |
| Press the On/Resume | |
port is on the side. Do not |
| button to turn on the |
connect the HP PSC to a USB |
| HP PSC. Wait for it to |
port on a keyboard or a non- |
| finish initializing. |
powered USB hub. See the |
|
|
Reference Guide for more |
|
|
details. |
|
|
a b
setup poster 1300 series all-in-one
8 Insert and align the print cartridges
Black |
a | b | c | d | e | f | |
Lower the | Remove the bright pink tape from | Hold the black print cartridge with the large HP label and the raised | Hold the color print cartridge with the large HP label and the raised | Close the | Press the Scan button. | |
access door. The print | the print cartridges. Do not touch | markings on top. Slide the cartridge at a slight angle into the right | markings on top. Slide the cartridge at a slight angle into the left side of | cartridge alignment page prints. | After the On light stops blinking, | |
carriage slides to the | the | side of the print carriage. | the print carriage. |
| ||
Place the top of the alignment page face down on the front left corner | alignment is complete. Discard or | |||||
middle. | the cartridges. |
|
| |||
Press firmly until the print cartridge snaps into place. | Press firmly until the print cartridge snaps into place. | of the glass. Close the lid. | recycle the alignment page. | |||
|
| |||||
|
|
| Make sure that both print cartridges are secure. |
|
|
Macintosh OS 9, OS X hp psc
Macintosh
9 Install the software
a | Turn on your Macintosh and wait |
| |
| for it to finish starting up. |
| Insert the Macintosh HP PSC CD. |
b | |
HP | |
| Installer icon on |
| the desktop. |
c
Follow the onscreen instructions. You may have to restart your Macintosh during setup. Be sure to complete the setup assistant.
10 Try the HP PSC
Congratulations! You are now ready to use your HP PSC. Select the HP Director icon in the dock to get started.
If you encounter problems during setup, see the Reference Guide.
www.hp.com/support
Copyright
Printed in Singapore or Malaysia.