Service cover
Description | Spare part number |
|
|
Service cover |
|
|
|
In Black | |
|
|
In White | |
|
|
In Red | |
|
|
In Blue | |
|
|
Before removing the service cover, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 38).
Remove the service cover:
1.Press in and slide latch (1) and release the right side of the service cover until the service cover tabs disconnect from the computer.
2.Lift up and remove the cover(2).
NOTE: Small tabs hold the cover in place. Firmly pull up on the cover to release the tabs.
Reverse this procedure to insert the service cover.
40 Chapter 4 Removal and replacement procedures