Hard drive
NOTE: Each hard drive spare part kit includes a cable adapter, bracket, and four rubber isolators.
Description | Spare part |
| number |
|
|
Hard drive: |
|
|
|
|
|
|
|
Before removing a hard drive, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 38).
5.Remove the service cover (see Battery on page 38).
Remove the hard drive:
1.Lift up the vinyl cover to expose the hard drive.
2.Using a small Phillips screwdriver, remove the 4 hard drive mounting screws.
Component replacement procedures 41