Product Description
Setting Standby
Standby is initiated by pressing the Fn+F4 hotkeys or automatically by the computer if it reaches the defined percentage of battery pack power remaining. When Standby is initiated, several subsystems will power off to conserve energy. The system will wake up from Standby when a key is pressed. Although the Standby mode maintains the information and opens the file upon
Hibernation
Hibernation is an
The computer uses the operating system with a power management utility that helps you maintain and conserve power when the computer is running on battery power.
Standby
Standby is an
Standby reduces power to system components that are not being used. Standby can be initiated by you or by the system. When Standby is initiated, all work is saved in random access memory (RAM) and the screen is cleared. When work is resumed, the information returns to the screen.
Refer to Section 1.4 in this chapter to identify the Power, Standby, and Hibernation controls.
Maintenance and Service Guide |