Removal and Replacement Procedures

3.Remove the two M2.5 × 4.5 screws securing the diskette drive to the top cover 1 (Figure 5-17).

4.Remove the tape adhering the diskette drive and TouchPad cables to the top cover 2.

5.Remove the diskette drive from the top cover 3.

Figure 5–17: Removing the Diskette Drive

Reverse the above procedure to install the diskette drive.

✎When installing the diskette drive in the top cover, make sure the tab in the front right corner of the diskette drive fits into the slot in the front right corner of the top cover.

5–28

Maintenance and Service Guide