![](/images/backgrounds/289517/hp-photosmart-120-digital-camera-users-manual-15287832x1.png)
Using the Setup menu
You can use the Setup menu to configure preferences on the
camera. Move through the Setup menu by using the buttons, and then press OK to make your selection.
Date & Time
For information about setting the date and time, refer to Chapter 1, Getting Started. When replacing the batteries in the camera, you may need to reset the date and time.
USB Configuration setting
This setting determines how the camera appears when connected to a computer.
zDigital Camera - causes the computer to recognize the camera as a digital camera (Picture Transfer Protocol (PTP) standard). This is the default setting on the camera.
zDisk Drive - causes the computer to recognize the camera as a disk drive (Mass Storage Device Class (MSDC) standard).
32 | hp photosmart 120 user’s manual |