b.Detach and release the display panel cable (it is attached to the display enclosure with
5.If it is necessary to replace the wireless antenna cables and transceivers:
a.Release the wireless antenna cables from the clips (1) built into the display enclosure.
b.Release the wireless antenna transceivers from the display enclosure. (The wireless antenna transceivers are attached to the display enclosure with
c.Remove the wireless antenna cables and transceivers (2).
Reverse this procedure to reassemble and install the display assembly.
Power connector
Description | Spare part number |
|
|
Power connector |
|
|
|
Component replacement procedures 75
