Fan
Description | Spare part number |
|
|
Fan (includes cable) |
|
|
|
Before removing the fan, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 47), and then remove the following components:
a.Optical drive (see Optical drive on page 48)
b.Hard drive (see Hard drive on page 49)
c.WLAN module (see WLAN module on page 52)
d.Keyboard (see Keyboard on page 56)
e.Top cover (see Top cover on page 60)
f.System board (see System board on page 73)
Remove the fan:
1.Turn the system board upside down with the front toward you.
2.Disconnect the fan cable (1) from the system board.
3.Remove the Phillips PM2.0×5.0 screw (2) that secures the fan to the system board.
4.Remove the fan (3).
Reverse this procedure to install the fan.
80 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
