If one of your scanner buttons is not listed here, its settings cannot be changed.
To change the settings for the current item only, you might want to scan using the HP Photo & Imaging software instead.
You change button settings from the Director, which is the main window that you use to reach the many functions of the HP Photo & Imaging software.
•On the Start menu, point to Programs, point to
For Macintosh see Macintosh OS 9: Choose Apple Help Center from the Finder
HP Precisionscan Help menu. Then choose HP Precisionscan Pro Help.
Pro Help.Macintosh OS X: Choose Mac Help from the Finder Help menu. Then click the question mark on the
change settings for the E-MAIL button
change settings for the SCAN button
If your scanner has an
1Open the Director, and on the Settings menu, click Button Settings.
2Click the E-mail Button tab, and change the settings.
3Return to the Director, and on the Settings menu, click E-mail Settings.
4Click the Scan Document tab, Scan Picture tab, or Program tab, and change the settings.
If your scanner has a SCAN button, use the following procedure to change its settings.
1Open the Director, and on the Settings menu, click Button Settings.
2Click the Scan Button tab, and change the settings.
You can make your scans go directly to a program other than the HP Scanning software. When you press the SCAN button, your scans go to the destination program you have selected (for example, a
On a Windows computer:
1Open the Director, and on the Settings menu, click Button Settings.
2On the Scan Button tab, in the Destination box, specify the destination to which you want to send your scan.
3Change other settings as required, and then click OK.
If you want your scans to go directly to the selected destination, on the Scan Button tab, make sure the Show Preview check box is cleared.
9
how to use the scanner