HP 2309V, 2159V, 1859M, 2009M/V/F, 2159M/V, 2709M manual Preparing the monitor for wall-mounting

3.Lift the monitor to an upright position and place on a flat, stable surface.

Monitor in upright position

Preparing the monitor for wall-mounting

WARNING: To reduce the risk of personal injury or of damage to the equipment, check that the wall-mounting fixture is adequately installed and secured before attaching the monitor. Refer to the instructions supplied with the wall-mounting fixture and check that it is capable of supporting the monitor.

1.Disconnect the power cable and any other cables from the monitor.

2.Place the monitor face down on a flat, protected surface.

3.Remove the four screws that fasten monitor base to the monitor.

Location of screws securing base to monitor