Note

This section applies only to HP Pavilion 5300 and 5200, HP nx9010, and Compaq Presario 2500 models.

Required Equipment

•#1 Phillips screwdriver.

Removal Procedure

1.Unplug the AC adapter, if present, and remove the battery.

2.Remove these additional assemblies:

•Hard disk drive (page 2-9).

•Keyboard cover (page 2-12).

•Keyboard (page 2-16).

•Switchboard PCA (page 2-18).

•Display assembly (page 2-23).

•Top case (page 2-26).

3.Remove the insulating tape that secures the floppy drive flex cable to the TouchPad bracket on the top case.

4.Remove the four M2.5×6.0 mm screws that secure the floppy drive and floppy drive bezel to the top case.

5.Remove the floppy drive.

6.Remove the M2.0×3.0 screw that secures the floppy drive bezel to the floppy drive.

7.Remove the floppy drive bezel.

2-34 Removal and Replacement

Service Manual