ProCurve Stack Management
Configuring Stack Management
Main Menu for stack Member named “Coral Sea” (SN = 1 from figure
Figure
2.You can now make configuration changes and/or view status data for the selected Member in the same way that you would if you were directly connected or telnetted into the switch.
3.When you are finished accessing the selected Member, do the following to return to the Commander’s Stack Access screen:
a.Return to the Member’s Main Menu.
b.Press [0] (for Logout), then [Y] (for Yes).
c.Press [Return].
You should now see the Commander’s Stack Access screen. (For an example, see figure
Converting a Commander or Member to a Member of Another Stack
When moving a commander, the following procedure returns the stack mem bers to Candidate status (with
1.From the Main Menu of the switch you want to move, select
9.Stacking2.To determine the MAC address of the destination Commander, select
2.Stacking Status (All)
3.Press [B] (for Back) to return to the Stacking Menu.