HP 315 87

Problem	Possible cause	Solution

My photo is	There was not enough	Wait for natural lighting conditions to improve or use the
too dark.	light.	flash to illuminate your subject (see “Using the flash” on
		page 39).
	The flash was on, but the	The flash can only illuminate objects that are within 3m
	subject was too far away.	(about 9 1/2 ft.) of the camera. Make sure your subject
		is within range of the flash when you take the photo.
	Your finger blocked the	Be sure to move your fingers away from the flash when
	flash.	you are ready to take a photo.

My photo is	The flash provided too	Change the flash setting to Auto or Off (see “Using the
too bright.	much light.	flash” on page 39).
	There was too much light	Try taking the photo from a different angle. Avoid
	provided by a natural or	pointing the camera directly toward a bright light or
	artificial source other	reflective surface on a sunny day. Use the On flash
	than the flash.	setting if there is light behind your subject.
	You were too close to the	Move back from the subject or set the flash to Off and
	subject to use the flash.	take the photo again.