Battery Replacement
Type 2:
a.To release the battery from its holder, push the retaining clip that holds the battery in place 1.
a. Lift the battery out of its holder 2.
Removing a Type 2 Battery
b.Slide the replacement battery into position. The battery holder automatically secures the battery in the proper position.
✎After the battery has been replaced, use the following steps to complete this procedure.
5.Replace the computer cover or access panel.
6.Plug in the computer and turn on power to the computer.
Reset the date and time, your passwords, and any special system setups, using Computer Setup. Refer to the Computer Setup (F10) Utility Guide.
Hardware Reference Guide |
