Hardware Upgrades
7.Remove the four screws that secure the drive cage to the front of the chassis 1 and then remove the single screw that attaches the lower drive cage to the fixed upper drive cage on the right side of the chassis 2.
✎The HP Compaq d248 Microtower has 3 screw securing the drive cage to the front of the chassis.
8.Slide the lower drive cage back about 1/2 inch to release it from the upper cage 3.
Removing the Lower Drive Cage
To install the lower drive cage, reverse the removal procedure.
ÄCAUTION: When installing the retaining screws always use the short (5/32” long) screw in the side mounting position and the 4 longer screws on the front of the chassis.
Hardware Reference Guide |
