PXE-based Windows PE deployment
This section describes how to use a PXE server to boot Windows® PE through a network. Review the server specification to determine whether PXE is supported on the target server. Currently, the Microsoft® RIS server is the only PXE server officially supported by Microsoft® with Windows® PE.
NOTE: Using a PXE server to boot Windows® PE through a network is only supported when used in conjunction with RIS.
Using PXE to boot Windows® PE eliminates the need to create a physical Windows® PE CD. Because the Windows® PE image files reside in the RIS server, files can easily be modified if needed. With network access, scripts, utilities, and data files can be stored on the RIS server or on other file servers on the network. For detailed information about using RIS with Windows® PE, refer to the Windows® PE tools documentation.
To build a Windows® PE image for use with a PXE server to automatically configure an HP ProLiant system:
1.Build the Windows® PE folder structure as described in "Microsoft Windows Preinstallation Environment (on page 5)."
2.Store the command batch file on RIS or on other servers on network. In the following example, the
customized command batch file is located on \\fileserver\share. factory
net use f: \\fileserver\share f:\startdeploy.cmd
For more information about using a batch file, refer to "Unattended configuration using startnet.cmd (on page 8)."
3.Use the edited STARTDEPLOY.CMD file to begin the deployment process. Be sure that the STARTDEPLOY.CMD script is located in the directory that will be used to create the Windows® PE ISO image. If STARTDEPLOY.CMD is used to create a connection to a network resource, the file must exist on the CD.
To use the Windows® PE image with RIS, refer to the Windows® PE tools documentation.
Network-based Windows PE deployment
This section assumes that the scripts, data files, and utilities are stored on a file server. Windows® PE runs startnet.cmd at the end of the boot process and launches the customized command batch file automatically.
To build a Windows® PE image to automatically configure an HP ProLiant system through a network:
1.Build the Windows® PE folder structure as described in "Microsoft Windows Preinstallation Environment (on page 5)."
2.Modify WinPE_Directory\Platform\system32\startnet.cmd to include the following: factory
net use f: \\fileserver\share f:\startdeploy.cmd
For more information about using a batch file, refer to "Unattended configuration using startnet.cmd (on page 8)."
3.Use the edited STARTDEPLOY.CMD file to begin the deployment process. Be sure that the STARTDEPLOY.CMD script is located in the directory that will be used to create the Windows® PE
Configuring HP ProLiant systems with Windows PE 17
