3 Connecting to a Windows NT Server 3.51

Windows 95 SR2

Windows 95 SR2

Requirements

 

• HP Vectra VE7/VE8with Windows 95 SR2.

 

• 3COM TokenRing 3C 339 card and drivers disk

 

• Windows 95 media.

 

• Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/

 

IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.

Device Configuration

•

I/O Base Address

DC00

•

Interrupt Request Level

10

•

Boot PROM

Disabled

•

Transceiver Type

Auto Select

•

Network Driver Optimization

Windows or OS/2 Client

•

Maximum Modem Speed

9600 Bps

• Plug and Play Compatibility

Disabled

•

Full Duplex

Disabled

Procedure

1With the HP Vectra VE7/VE8 turned off, install the 3COM Token Ring 3C339 adapter card into an PCI slot.

2Connect network cable media to the 3COM 3C339 card.

3Insert a DOS bootable diskette and power on the machine.

4After booting, insert the 3COM drivers disk “Etherlink 3C339 Drivers.” and change to Drive A: , and execute “3C3X9CFG.EXE.”

5Select “Configure NIC,” and verify the resource settings listed above under the heading “Device Configuration.”

6If changes are required, save those changes and exit.

7Remove the 3Com Software driver diskette and reboot the machine.

8Click on “Start” and point to “Settings”, then select the “Control Panel.”

9In the Control Panel group, double click on the “Network” icon .