1 Connecting to a Netware 3.12 Server
Windows 95 SR2
Windows 95 SR2 | Requirements |
| • HP Vectra VE7/VE8 with Windows 95 SR2 installed. |
| • 3COM 3C 339 Token Ringcard and drivers disk |
| • Windows 95 SR2 media. |
| • Novell Netrware 3.12 server that supports Net BEUI, NWLink IPX/SPX, |
| and NWLink NetBIOS transfer protocols. |
Device Configuration
• | I/O Base Address | 300 |
• | Interrupt Request Level | 10 |
• | Boot PROM | Disabled |
• | Transceiver Type | Auto Select |
• | Network Driver Optimization | Windows or OS/2 Client |
• Plug and Play Compatibility | Disabled | |
• | Full Duplex | Disabled |
Procedure
1With the HP Vectra VE7/VE8 turned off install the 3COM 3C339 adapter card into an PCI slot.
2Power on the machine and restart Windows 95 SR2 in
3Insert the 3COM drivers diskette (downloaded from 3COM’s website) and execute 3C3X9CFG.EXE.
4Select “CONFIGURE NIC,” and verify the resource settings listed above under the heading “Device Configuration.”
5If changes are required, save those changes and exit.
6Remove the 3COM cards driver diskette and restart the machine.
7After Windows loads, click on “Start,” to “Settings” and over to “Control Panel.”
8Double click on “Network” and select “Add.”
9Choose to add an adapter, click on “Add” then on “Have Disk.”
10Insert the 3C339 drivers diskette and set path to “A:\” and hit Enter.
