2 Connecting to a Netware 4.11 Server

Windows for Workgroups

7Execute INSTALL.EXE.

8Specify the settings as listed below:

❒C:\NWCLIENT

❒Yes

❒Yes

❒C:\WINDOWS

❒No

❒3Com Fast Etherlink/Etherlink III Bus Master

9Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set the path to “A:\NETWARE\CLIENT.” (If you have an HP preloaded HDD, set path to “C:\Masters\LanDrv\3C339\NWCLIENT\)

10Press “Enter” to continue the installation.

11When prompted, insert the corresponding disks to complete file transfer and driver installation.

12When the install utility is finished, press <CRTL><ALT><DEL> to restart the machine.

13After Windows loads, open the “NETWORK” folder, double-click the “NETWORK SETUP” icon.

14Select “Networks”, and verify that “Novell Netware (Workstation Shell 4.0 and above)” is listed under “Install Windows support for the following network only:” and click on “OK.”