Adjusting System Settings
System Settings Parameters
This section contains the information about the parameters used for the printer.
Reference
For more information about the other parameters in the System Settings menu, see the “System Settings” manual.
Menu | Description |
|
|
1.Function Priority | You can specify the mode (Copier, Fax or Printer) to be displayed |
| immediately after the operation switch is turned on or System Re- |
| set mode is turned on. |
| Note |
| |
| ❒ Default: Copier |
| |
| 4 | ||
|
|
| |
3.System Reset | The machine returns to its prioritized mode automatically after |
| |
| your job is finished, when you selected the time. This function is |
| |
| called “System Reset”. The time can be set from 10 to 999 seconds, |
| |
| or no system reset. |
| |
| Note |
| |
| ❒ Default: On (60 seconds) |
| |
| ❒ You can specify the prioritized mode with the user tools. See |
| |
| “1.Function Priority”. |
| |
|
|
|
|
6.Auto Off Timer | The machine turns itself off automatically to conserve energy after |
| |
| your job is finished, after the selected time. This function is called |
| |
| “Auto Off ”. The time can be set from 1 to 240 minutes. |
| |
Note
❒Default: 30 minutes
❒Auto Off might not be effective when an error message is dis- played.
❒To return to the ready condition from Auto Off, the machine requires the same
❒When the machine receives a fax or printer data in Auto Off mode, it automatically prints the fax or the printer data.
41