Installing the drive enclosure

1.Remove the bezel covers from each side of the enclosure (see Figure 6 (page 6)).

CAUTION: Be careful when removing the bezel covers so as to not break the locking tabs that secure the covers to the enclosure.

Figure 6 Bezel cover removal

2.Align the enclosure with the rails and slide it into the cabinet. Figure 7 Slide drive enclosure onto rails

3.Continue sliding the enclosure into the cabinet until the front edge is flush with the front of the rack (1, Figure 8 (page 7)). Tighten the enclosure thumbscrews into the cabinet (2), taking care to not strip the Phillips-head thumbscrews.

6Installing the drive enclosure