To set, change, or delete this password, follow these steps:
1.Open Computer Setup by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the
2.Use a pointing device or the arrow keys to select Security > Setup BIOS Administrator password, and then press enter.
●To set a BIOS administrator password, type your password in the Enter New Password and Confirm New Password fields, and then press enter.
●To change a BIOS administrator password, type your current password in the Enter Current Password field, type a new password in the Enter New Password and Confirm New Password fields, and then press enter.
●To delete a BIOS administrator password, type your current password in the Enter Password field, and then press enter 4 times.
3.To save your changes and exit Computer Setup, use the arrow keys to select Exit > Exit Saving Changes.
Your changes take effect when the computer restarts.
Entering a BIOS administrator passwordAt the Enter password prompt, type your administrator password, and then press enter. After 3 unsuccessful attempts to enter the administrator password, you must restart the computer and try again.
Using passwords 69