HP 4635 Set up fax

Set up fax

English

1.If your country or region is listed below, visit www.hp.com/uk/faxconfig for setup information. Otherwise, follow the instructions in this guide.

••	Austria	••	Finland	••	Ireland	••	Netherlands	••	Sweden
••	Belgium	••	France	••	Italy	••	Portugal	••	Switzerland
••	Denmark	••	Germany	••	Norway	••	Spain	••	United Kingdom

2.Connect the phone line.

Note: HP printers are designed specifically for use with traditional analog phone services. If you are in a digital phone environment (such as DSL/ADSL, PBX, ISDN, or FoIP), you might need to use digital-to-analog filters or converters when setting up the printer for faxing. Contact your phone company to determine which setup options are best for you.

If the phone line is only used for fax

a.Connect one end of the phone cord to the phone wall jack.

b.Connect the other end to the port labeled 1-LINE on the back of the printer.

Note: If you have subscribed to a DSL/ADSL service, connect a DSL/ADSL filter between the 1-LINE port and the phone wall jack.

1	Phone wall jack
2	Fax port (1-LINE)
	Note: Do not insert into the port labeled 2-EXT.
3	DSL/ADSL filter (provided by the telephone
	company or service provider)

If additional devices are connected to the phone line

If you have other devices to connect, connect them as shown in the diagram below:

*TAM: Telephone answering machine

**FoIP: Fax over Internet Protocol

1Phone wall jack

2Parallel splitter

3DSL/ADSL modem

4Telephone answering machine

5Telephone

6ISDN wall jack

7Terminal adapter or ISDN router

8Broadband modem

9DSL/ADSL filter

10Analog telephone adaptor

3.Test fax setup.

The fax test checks hardware, verifies phone cord type and connection status, and checks for a dial tone and an active phone line. To run the test:

a.From the Home screen on the printer display, press the Up and Down buttons to select Fax, and then press OK.

b.Select Settings, select Advanced Settings, select Fax Setup Wizard, and then follow on-screen instructions.

6