P212, P410, and P411 LEDs
LED ID | Color | Name | Comments |
|
|
|
|
1 | Amber | DS9: System Error | The controller ASIC has locked up and cannot |
|
|
| process any commands. |
2 | Green | DS8: Idle Task | This LED, together with the Gas Pedal LED (next |
|
|
| item), indicates the amount of controller CPU |
|
|
| activity. For more information, see the following |
|
|
| table. |
|
|
|
|
3 | Green | DS7: Gas Pedal | This LED, together with the Idle Task LED (previous |
|
|
| item), indicates the amount of controller activity. For |
|
|
| more information, see the following table. |
|
|
|
|
4 | Green | DS6: Heartbeat | When the controller is in good health, this LED |
|
|
| flashes every two seconds. |
5 | Green | DS5: Pending Command | The controller is working on a command from the |
|
|
| host driver. |
|
|
|
|
6 | Green | DS4: Port 1 Active | Port 1 is active. |
7 | Green | DS3: Port 2 Active | Port 2 is active. |
8 | Amber | DS2: Drive Failure | To determine which drive has failed, check the Fault |
|
|
| LED of each physical drive connected to the |
|
|
| controller. |
|
|
|
|
9 | Amber | DS1: Diagnostics Error | One of the server diagnostics utilities has detected |
|
|
| a controller error. |
|
|
|
|
Gas pedal LED | Idle task LED | Controller CPU activity level |
status | status |
|
|
|
|
Off | Flashing | |
Flashing | Off | |
On steadily | Off | |
On steadily | On steadily |
Component identification 17