P812 LEDs
Item | Color | Name | Comments |
|
|
|
|
1 | Green | CR76: Idle Task | This LED, together with the Gas Pedal LED |
|
|
| (following item), indicates the amount of controller |
|
|
| CPU activity. For more information, see the |
|
|
| following table. |
|
|
|
|
2 | Green | CR75: Gas Pedal | This LED, together with the Idle Task LED (previous |
|
|
| item), indicates the amount of controller CPU |
|
|
| activity. For more information, see the following |
|
|
| table. |
|
|
|
|
3 | Green | CR74: Heartbeat | When the controller is in good health, this LED |
|
|
| flashes every 2 seconds. |
|
|
|
|
4 | Green | CR73: Pending Command | The controller is working on a command from the |
|
|
| host driver. |
|
|
|
|
5 | Green | CR72: Port 1 Activity | Port 1 is active. |
|
|
|
|
6 | Green | CR 71: Port 2 Activity | Port 2 is active. |
|
|
|
|
7 | Amber | CR78: Drive Failure | To determine which drive has failed, check the Fault |
|
|
| LED of each physical drive connected to the |
|
|
| controller. |
|
|
|
|
8 | Amber | CR77: Diagnostics Error | One of the server diagnostics utilities has detected |
|
|
| a controller error. |
|
|
|
|
9 | Green | CR82: MIPS ready | The embedded SAS expander is active. |
|
|
|
|
Gas pedal LED status | Idle task LED status | Controller CPU activity level |
|
|
|
Off | Flashing | |
Flashing | Off | |
On | Off | |
On | On |
Component identification 25