HP 5000C/CT manual Flexible disk drive, Built-in I/O

	Sector Size	512 Bytes	512 Bytes	512 Bytes	512 Bytes
	Recording Zones	4.00	8.00	8.00	8.00
	User Cylinders	NA	NA	3478.00	3478.00
	Cylinders	1053.00	1591.00	NA	NA
	User sectors/Track	63.00	63.00	NA	NA
	at zone 0
	Data Heads	4.00	8.00	4.00	6.00
	Disks	NA	NA	2.00	3.00
		Note: The hard disk drive can be removed by the user for easy upgrades. The hard
		drive is located on the bottom case and with the removal of one screw the hard drive
		can be removed. The hard drive plastic case on the OB5000 is changed from the
		OB4000 due to a design change requirement; therefore, they are not
		interchangeable between platforms.
Flexible disk drive		Internal 3.5 inch, 1.44-MB flexible disk drive is standard on all models. The flexible
		disk drive can be easily removed by the user and replaced with an additional battery
		pack to double battery life. This is part of the modularity features of the OmniBook
		5000.
		Manufacturer: F1079A = Canon; F1079B = NEC (subject to
		change)
Built-in I/O		9-pin, 115,000-b/s RS-232 port, UART 16550
		25 pin bi-directional ECP and EPP parallel port

SVGA out (up to 1024 x 768 x 256 colors) with simultaneous viewing VGA out (640 x 480 x 65,536 colors)

115,000-b/s bi-directional infrared port. Note: Infrared hardware can support the IRDA (Infrared Data association) higher speed standards when available.

Expansion Bus Connector for connecting to the docking station.

SCSI-2 port, mini 50 pin. Controller: AMD, 32-bit PCI bus, 10 MBps, asynchronous max. transfer

NTSC/PAL port

Keyboard/mouse port

Headphone/stereo-out port

Microphone port

Stereo-in port

MIDI/joystick port

17