| Heat Pipe | |
Heat | Bracket | |
|
| |
Spreader/CPU |
| Display/Chassis |
Screws (2) |
| |
| Screw | |
|
| |
|
| Heat Spreader |
|
| Assembly |
Palm Rest Screw
Figure 10 - Heat Spreader Assembly
5.Remove the Upper Cover by removing the Palm Rest Screw on the left side of the cover. Next, pull the right side outward until it comes off the snap. Once the cover clears the snap, the left side will lift free (see illustration below). The Microphone Assembly may dislodge from the Upper Cover during removal. If it does not, gently pull the Microphone Assy from the pocket in the Upper Cover. If necessary, the Microphone Assy may be removed from the Icon Board at this point.
36