load originals and load paper

to load the input tray

1Slide the paper-width and -length

guides to their outermost positions.

2 Tap the stack on a flat surface to align the edges of the paper, and then check the paper for the following:

– Make sure it is free of rips, dust, wrinkles, and curled or bent edges.

– Make sure all the paper in the stack is the same size and type.

3With the output tray raised, insert paper into the input tray until it stops. The print side should be facing down, and the letterhead or top of page should be facing forward. Do not overfill the input tray as this may cause paper jams.

4Slide the paper-width and -length

guides in until they stop at the edges of the paper. Make sure that the paper stack lies flat in the input tray and fits under the tab of the paper-length guide.

5To prevent paper from falling off

the tray, fully extend the output-tray extender.

8

hp officejet 5100 series