load originals and load paper

Labels (use only for printing)

•Always use letter-size or A4-size label sheets designed for use with

HP Inkjet products (like Avery Inkjet Labels), and make sure that the labels are not over two years old.

•Fan the stack of labels to make sure none of the pages are sticking together.

•Place a stack of label sheets on top of standard paper in the paper tray, print-side down. Do not insert labels one sheet at a time.

set the paper type

If you want to use a different type of paper, such as photo paper, transparency film, t-shirt transfer paper, or brochures, simply load that paper in the paper tray. You should then change the paper type settings to ensure the best print quality.

HP recommends paper type settings according to the type of paper you’re using.

This section refers to copy options only. If you want to set the paper type for printing, set the properties from the Print dialog box.

to set the paper type for current and future copy jobs

1On the front panel press COPY until Paper Type appears.

2Press until the appropriate paper type appears, and then press ENTER to select it.

3Press COPY again until Set New Defaults appears, and then press until Yes appears. Press ENTER to set the new defaults.

set the paper size

The HP Officejet can copy and print onto letter, legal, or A4 paper. Use the following procedure to set the paper size for copying.

1Select one of the following:

–To change the size for a copy job, press COPY until Paper Size appears.

–To change the size for a fax job, press SETUP until 3: Basic Fax Setup appears, and then press ENTER to select it. After 1:Date and Time

appears, press until 4:Paper Size appears, and then press ENTER to select it.

2Press until the desired paper size appears, and then press ENTER to select it.

10

hp officejet 5100 series