Remove the power connector cable:

1.Turn the computer, with the right side toward you.

2.Disconnect the power connector cable (1) from the system board.

3.Remove the double-sided tape (2) from the power connector.

4.Remove the power connector cable (3).

Reverse this procedure to install the power connector cable and bracket.

Speakers

Description

Spare part number

 

 

Speaker Kit (includes left and right speakers and cable)

686598-001

 

 

Before removing the speakers, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the display panel (see Display panel on page 32).

5.Remove the base enclosure (see Base enclosure on page 34).

6.Disconnect the battery cable (see Battery on page 36).

60 Chapter 4 Removal and replacement procedures