Table A-1Numeric Codes and Text Messages (continued)

Control panel message

Description

Recommended action

 

 

 

 

 

For three devices, use SATA 0, SATA 1, and

 

 

SATA 2.

 

 

 

1797-SATA Drivelock is not supported in

Drivelock is enabled on one or more SATA

Either remove the Drivelocked SATA device

RAID mode.

hard drives, and they cannot be accessed

or disable the Drivelock feature. To disable

 

while the system is configured for RAID

the Drivelock feature, enter Computer Setup,

 

mode.

change Storage > Storage Options > SATA

 

 

Emulation to IDE, and select File > Save

 

 

Changes and Exit. Reenter Computer Setup

 

 

and select Security > Drivelock Security.

 

 

For each listed Drivelock-capable SATA

 

 

device, ensure Drivelock is Disabled. Lastly,

 

 

change Storage > Storage Options > SATA

 

 

Emulation back to RAID and select File >

 

 

Save Changes and Exit.

 

 

 

 

1801-Microcode Patch Error

Processor is not supported by ROM BIOS.

1.

Upgrade BIOS to proper version.

 

 

2.

Change the processor.

 

 

 

 

2200-PMM Allocation Error during MEBx

Memory error during POST execution of the

1.

Reboot the computer.

Download

Management Engine (ME) BIOS Extensions

2.

Unplug the power cord, re-seat the

 

option ROM.

 

 

 

memory modules, and reboot the

 

 

 

computer.

 

 

3.

If the memory configuration was

 

 

 

recently changed, unplug the computer,

 

 

 

restore the original memory

 

 

 

configuration, and reboot the computer.

 

 

4.

If the error persists, replace the system

 

 

 

board.

 

 

 

 

2201-MEBx Module did not checksum

Memory error during POST execution of the

1.

Reboot the computer.

correctly

Management Engine (ME) BIOS Extensions

2.

Unplug the power cord, re-seat the

 

option ROM.

 

 

 

memory modules, and reboot the

 

 

 

computer.

 

 

3.

If the memory configuration was

 

 

 

recently changed, unplug the power

 

 

 

cord, restore the original memory

 

 

 

configuration, and reboot the computer.

 

 

4.

If the error persists, replace the system

 

 

 

board.

 

 

 

 

2202-PMM Deallocation Error during MEBx

Memory error during POST execution of the

1.

Reboot the computer.

cleanup

Management Engine (ME) BIOS Extensions

2.

Unplug the power cord, re-seat the

 

option ROM.

 

 

 

memory modules, and reboot the

 

 

 

computer.

 

 

3.

If the memory configuration was

 

 

 

recently changed, unplug the power

 

 

 

cord, restore the original memory

 

 

 

configuration, and reboot the computer.

 

 

4.

If the error persists, replace the system

 

 

 

board.

 

 

 

 

50 Appendix A POST Error Messages

ENWW