HP 610 Copier two-sidedprinting problems

		hp digital copier 610 printing and software guide
problem	solution
Automatic paper type	When the Automatic paper type option is
option is enabled	enabled, it takes a few seconds for the printer to
	determine the appropriate paper type. To increase
	the print speed, specify a paper type. For more
	information, see adjust paper settings for printing
	on page 4.
Two-sided printing	Allow more time to print two-sided documents than
does not seem to work	to print single-sided documents.
Printer software is	Download the most recent software updates for
outdated	the printer at:
		www.hp.com/go/copiers
Computer does not	•	Check the computer’s RAM and processor
meet system		speed. For more information, see system
requirements		requirements on page 35.
	•	Increase the space on your hard drive. If your
		computer has less than 100 MB available on
		the hard drive, the printer will require more
		time to process printing jobs.
Printhead is failing	A failing, but usable, printhead might slow printer
	performance. Print a Self-Test Report from the front
	panel to check whether a printhead is failing. For
	more information, see Self-Test Report in the HP
	Digital Copier 510/610 Reference Guide.

two-sided printing problems

Several issues may occur when you try to print a two-sided document. For more information, also see Troubleshooting in the HP Digital Copier 510/ 610 Reference Guide.

problem	solution
The option for two-sided	In the Setup tab, verify that the paper type
printing cannot be selected	and size you have selected are supported
	by the two-sided printing accessory. For a
	list of supported paper types, see load
	specialty paper for printing on page 2.
Paper size changes when the	This means that the paper size selected in
two-sided printing option is	the Setup tab of the Properties dialog box
selected	is not supported by the two-sided printing
	accessory. Select a supported paper type
	and size.

two-sided printing problems 31