HP 610 Copier USB connection problems

hp digital copier 610 printing and software guide

problem	solution
The binding margin is in the	You may have selected an incorrect
wrong place	paper orientation (Book or Tablet). On
	the Features tab of the Properties dialog
	box, verify that your selection places the
	binding along the side (Book) or the top
	(Tablet) of your paper.

Only one side prints although	Use the following solutions:
the two-sided printing option is	•	Print the document using the manual
selected		two-sided printing feature.
	•	Use a paper type supported by the
		two-sided printing accessory.
	•	Use a paper size supported by the
		two-sided printing accessory.

The following errors may occur if a problem exists with the USB connection between your HP Digital Copier and your computer.

problem	solution
there was an	This error message appears if the copier/printer is not
error writing	receiving correct data from another USB device or the hub.
to <name of	Connect the copier/printer directly to the USB port on the
USB port>	computer.

conflicting	A printing conflict may arise when the copier/printer and
USB cable	several USB devices are attached to a hub. Use one of the
connections	following methods to solve the conflict:
	•	Connect your copier/printer directly to your computer
		with the USB cable; do not use a hub.
	•	If the copier/printer is attached to a hub, do not use
		other USB devices attached to the hub while printing.

no plug-and-	Your computer should detect your copier/printer and allow
play event	you to proceed through the software installation process as
occurs,	soon as you plug your copier/printer into the computer. If
preventing	you experience problems, do the following:
the software	•	Verify that the USB cable if firmly connected to your
installation		copier/printer and to your computer.
	•	Verify that the On button on the front panel is lit.
	• Verify that your operating system complies with the list of
		supported systems in system requirements on page 35.

32	troubleshooting tips