Figure 4-1. ICU Window

You can maneuver through each menu and dialog box using a mouse. If a mouse is not available, you can use the keys shown in Table 4-1.

Each menu and menu option has an underlined character in its name; when you press the <Alt> key in conjunction with the key for the underlined character, that menu or menu option is selected.

Table 3-1. ICU Keys

Keys(s) Action

<Alt><x><y> Displays the menu containing the underlined letter x and performs the operation indicated by the menu item containing the underlined letter y. For example, to save a file (that is, to display the File menu and select the Save menu option), press <Alt><f> and <s>.

<Tab>

Moves from one control button or list to another.

 

 

Up- and

Moves up and down through items in a list.

down-arrow

 

keys

 

<Spacebar> Highlights an item in a list.

<Enter>

Selects the highlighted button or item in a list.

Adding a Listed Card

NOTE: If you want to add a configuration file that you received on diskette with a new expansion card, you must copy the configuration file to the \db subdirectory on the backup copy of the ICU diskette. You should then reboot your system and perform the following procedure to add the expansion card.

Use the following procedure to add a listed card with the ICU:

1.Start the ICU as described in "Starting the ICU".

2.From the ICU window, click Add or select Add Card from the Configure menu.

3.Click the name of the category of card that you want to add. If you clicked Add in step 2, click OK. A dialog box like the one in Figure 4-2 appears, listing the names of all available cards of that type.

Figure 4-2. Add Network Card Dialog Box