S e l e c t i n g T e x t
■Always Zoom scan a selection area you want to convert to text, then adjust the position and size of the selection area to be sure it contains all the characters you want to convert.
■The text in the selection area is displayed at a low resolution and may not appear readable, even after a Zoom scan.
■During the final scan when you
Drag-and-drop to another program
1Start the destination program.
2Open the document and view the page that will receive the image.
3In the scanning software window, position the pointer inside the selection area.
The pointer changes to 
.
4Press the left mouse button and drag the image to its position in the open document.
The pointer changes to 
.
5Release the mouse button.
A final scan of the image is performed.
The text is converted to editable text and placed in the open document.
T I P
Be sure to keep the original in the same place on the scanner glass until the final scan of the image is completed.
5 | Scanning text | Book Contents | Index |
|
➮
➮ HP PrecisionScan Pro User’s Guide | 91 |