Restoring previous settings

Some of the settings that you can change in the camera menus do not remain set after you turn off the camera. However, you can restore the settings from the last time the camera was on and had at least one non-default setting (which could actually be several power cycles ago) by holding down the OK button

while also sliding the ON/OFF switch to turn on the camera. The restored settings are then displayed across the top of the status screen. (See the previous subsection.)

Choosing the language

The first time you turn on the camera, the following screen appears and prompts you to choose a language.

1Scroll to the language that you

want by using the buttons on the Controller .

2Press the OK button to select the highlighted language.

NOTE You can change the language setting by using the Language menu option in the Setup menu. See Chapter 6: Using the setup menu on page 71, and then see Language on page 74.

18

hp photosmart 630 series user’s manual