Disabling the TV Option
When you want to disconnect the TV from the computer, you may need to disable the TV option to return your computer display to its original resolution.
To disable the TV option:
1.
2.Click Properties.
3.Click the Settings tab.
4.Click the Advanced button.
5.Click the nView tab, and then select the Standard [nView disabled] option.
IMPORTANT: If you viewed the computer
image on just the TV, do the following: With Standard [nView disabled] selected under nView Modes, click the Device Settings button, choose Select Output Device, and then select the Analog Display option.
6.Click the OK button, and then click OK again.
7.When the computer image appears on the computer screen, click Yes to keep the setting. You have 15 seconds to accept this new setting before it reverts to the previous setting.
Disconnecting the TV
1.Disable the TV option. See the previous procedure.
2.Turn off the TV and the computer.
3.Remove the video cable at the TV and the PC.
4.Remove the audio cable at the TV and the PC.
5.Reconnect your computer speaker cable to the Line Out jack (lime green connector) on the back of the computer.
4 | Connecting the Computer to a Television |
