Connecting to PC

_Connecting this unit to PC

When using Windows 98SE/Me, connect only after installing the driver. (P55)

Be sure to insert the battery and connect the AC adaptor.

(Continued)

1

Connect the USB cable and the AC adapter to the USB cradle.

Be sure to insert the AC adaptor in a outlet.

2

Insert the card in this unit. (P14)

3

Turn this unit on, and set to the playback mode.

4

Attach this unit to the USB cradle.

This unit turns to the USB connection mode.

When the Power/Card Access Lamp of this unit is blinking, do not remove this unit from the USB cradle nor disconnect the USB cable. The software may not function correctly and the transmitting data may be damaged.

Use the supplied USB cable only.

Do not disconnect the AC adaptor from the PC during connection.

When the USB connection mode (displayed as PC ACCESSING) is not canceled even if you turn the PC off, disconnect the USB cable.

If the PC is in the Standby mode while connecting to the camera, the PC may not recognize the camera when recovering from the Standby mode. In this case, restart the PC.

58

Page 58
Image 58
Panasonic SV-AS10 Connecting this unit to PC, Connect the USB cable and the AC adapter to the USB cradle