71
_Memory card
When the power/card access lamp is
Blinking (when the card is being read),
do not remove the card, turn the
power off, or subject it to vibration or
impact.
Do not leave the card in places where
there is high temperature or direct
sunlight, or where electromagnetic
waves or static electricity are easily
generated. Do not bend, drop, or
subject it to strong vibration.
• If the above precautions are not taken,
the card or the recorded content may
be damaged.
Be sure to pull out and store the card
after use.
• Keep the card in the storage bag to
store or carry the card around.
• Do not allow dirt, dust or water to enter
the terminals on the back of the card.
Do not touch it with your fingers.
_Picture data
• As a result of improper operations,
recorded data may be damaged or
erased. We are not responsible for the
loss caused by the erasure of the
recording data.
• When this message is displayed
“PLEASE WAIT”, never remove the
battery or the card, and do not
disconnect the AC adapter (supplied)
out. It may cause damage to the data
and malfunctions.
SV-AS10_PP.book 71 ページ ２００３年７月３０日　水曜日　午後９時２４分