14
Insert the Card

Be sure to turn the power off when you insert the card.

1
Slide the door while releasing the
lock. 1
Open the door. 2
2
Insert the card all the way in until it
clicks.
Check the direction of the card.
Do not touch the connecting terminal
on the rear of the card.
If you do not insert the card all the way,
it may be broken.
3
Close the door. 1
Lock the door while sliding it. 2
If you cannot close the Card/Battery
door completely, remove the card
once, then insert it again.
We recommend using the cards made
by Panasonic. (Use genuine card only)
SV-AS10_PP.book 14 ページ 2003年7月30日 水曜日 午後9時24分