42 HP Jornada 600 Series User’s Guide

You need the following information to establish a Remote Networking connection:

•Your Windows user name and password, if you are required to log on to your computer

•Telephone number of the modem

To create a connection to a computer not on a network (such as a home computer), you will need to create a new connection using Remote Networking on your HP Jornada.

To create a Remote Networking connection

1.On the Start menu, point to Programs, point to Communication, and then tap Remote Networking.

2.In the Remote Networking folder, double-tap Make New Connection.3.In the Make New Connection dialog box, tap Dial-up, and then tap Next.

4.If you have the HP Jornada 680 or 690, select Built-In Modem from the list of modems. If you have the HP Jornada 680e or 690e, select the appropriate option for the modem you have installed.

5.Tap TCP/IP Settings, and then tap the General tab. Make sure the Use Server-assigned IP Address check box is selected.

6.On the Name Servers tab, tap Server-assigned addresses, and then tap OK.

7.Tap Next, and then fill in the telephone number you wish to dial. Tap Finish. A new icon appears, labeled with the name you chose, in your Remote Networking folder. This connection will also appear in your remote synchronization dialog box.

To set a dialing location for a Remote Networking connection, double-tap the icon for the connection in the Remote Networking folder. In the Dial-up Connection dialog box, tap Dial Properties, and then fill in the information as you would for a network or ISP connection using the HP Jornada dialup application.

To start remote synchronization

1.On your HP Jornada Start menu, point to Programs, point to Communication, and then tap ActiveSync.