HP 700 Busy Redial, No Answer Redial, Answer Ring Pattern, Error Correction Mode

First then press press

6

Menu

then

press 2

Busy Redial

The HP OfficeJet is factory set to automatically redial at intervals after a busy signal. You can turn this setting off.

Note: To immediately redial the last fax number you entered on the HP OfficeJet keypad, press the Redial/Pause button.

		6	No Answer Redial
			You can set the HP OfficeJet to automatically redial at intervals if a
	Menu
then		3	fax call is not answered.
press

		6	Answer Ring Pattern
			The Answer Ring Pattern setting applies only if your phone line has
	Menu
then		4	more than one number, each with its own distinctive ring pattern. This
press			is a service provided by your telephone company. If you do not have
			this service, the Distinctive Ring feature on the HP OfficeJet will not
			work and the Answer Ring Pattern should be set to All Rings.

If you do have Distinctive Ring service, have your telephone company assign one ring pattern to voice calls and another to fax calls. Then use the Answer Ring Pattern setting to set your HP OfficeJet to automatically answer the fax call pattern.

Note: If you have an answering machine on this line for receiving voice calls (using one of the other distinctive ring patterns), set it to answer after 3 or more rings or your HP OfficeJet will not receive fax calls.

		6	Error Correction Mode
			Error Correction Mode (ECM) reduces data lost due to poor phone
	Menu
then		5	lines. In ECM, phone charges are unaffected, or may even be reduced,
press			on good phone lines. On poor phone lines, ECM increases sending
			time and phone charges, but sends the data much more reliably.

Two

.........................................................................................................................................

2-5