HP 503a (AP), 703k (AP), 743a (AP) manual Automatic Standby or Hibernation Mode, Click Control Panel

Automatic Standby or

Hibernation Mode

To automatically put the computer into standby or hibernation mode, modify the power management settings:

1Click Start on the taskbar.

2Click Control Panel.

3Click Performance and Maintenance, if present.

4Double-click Power Options.

5Check if the auto-hibernation feature is enabled by clicking the Hibernate tab, and seeing if a check mark is in the Enable hibernation check box. If necessary, enable the feature by clicking the check box so that a check appears in it.

26 HP Pavilion home PC

6If you changed the Enable hibernation check box, click Apply.

7Click the Power Schemes tab to set the timers for standby and/or hibernation. In the Power Schemes box, select a power scheme from the drop-down list. Choose the timers:

￿To turn on auto-standby for the computer, click a time (such as After 30 mins) in the System standby list.

￿To set the timer for auto-hibernation, click the time to elapse before hibernation in the System hibernates list.

Note: If both standby and hibernation timers are set, the system hibernation timer must be set for a longer time than the system standby timer.

8Click OK.