Power switch
The power switch is attached to the left, front of the chassis.
1.Prepare the computer for disassembly (Preparation for disassembly on page 72).
2.Remove the access panel (Access panel on page 73).
3.Remove the front bezel (Front bezel on page 73).
4.Rotate the drive cage to its upright position.
5.From the inside of the front of the chassis, press the tab at the top of the power switch (1) and push the top of the power switch away from the front of the chassis (2).
6.Remove the cable from the clips built into the bottom of the chassis (1).
106 Chapter 5 Removal and replacement procedures – small form factor (SFF) chassis