To install the power supply, reverse the removal procedure.
System board
Description
System board for use in models without Windows 8.1
System board for use in models with Windows 8.1 Standard
System board for use in models with Windows 8.1 Professional
System board for use in NetClone models
1.Prepare the computer for disassembly (Preparation for disassembly on page 36).
2.Remove the access panel (Access panel on page 37).
3.When replacing the system board, make sure the following components are removed from the defective system board and installed on the replacement system board:
●Memory modules (Memory on page 42)
●Expansion cards (Expansion cards on page 45)
●Heat sink (Heat sink on page 61).
●Processor (Processor on page 62)
4.Disconnect all cables connected to the system board, noting their location for reinstallation.
5.Remove the eight Torx T15 screws that secure the system board to the chassis.
68 Chapter 4 Removal and replacement procedures – Microtower (MT) chassis