Printing images
NOTE If you are using the HP 8886 camera dock to do this task, see the HP 8886 Camera Dock User’s Manual.
To print images that have been unloaded to the computer, you can use the HP Photo & Imaging software that was shipped with the camera.
You can also connect the camera directly to any HP Photosmart printer or to any other HP printer with front panel USB ports, then print images selected from the camera Share menu or all images in the camera.
To print directly to an HP Photosmart printer or to any other HP printer with front panel USB ports:
1Turn on the camera.
2Check that the printer is turned on and is online. (There should be no blinking lights on the printer or error messages displayed about the printer.) Load paper into the printer, if needed.
3Your camera came with a
special USB cable for connecting the camera directly to a printer. Connect the square end of the USB cable to the printer.
4 Open the rubber door on the side of the camera and connect the small end of the USB cable to the USB connector on the camera.
Chapter 5: Unloading, printing, and displaying images | 63 |