Problem

Possible cause

Solution

 

The wrong

The batteries

The date and time will be

date and/or

died or were

maintained for about 10 minutes

time is

removed from

without batteries installed. Reset

shown.

the camera for

the date and time by using the

 

too long.

Date & Time option in the Setup

 

 

menu. (See page 68, 68)

 

 

 

The camera

The camera is

Turn on the camera, or turn it off

does not

turned off or

and then on again.

 

respond

has shut down.

 

 

when I press

 

 

 

The camera is

Most of the camera buttons,

a button.

connected to a

except for the

switch,

 

 

computer.

do not respond when the camera

 

 

is connected to a computer. If they

 

 

respond, it is only to turn the

 

 

Image Display on if it is off, or, in

 

 

some cases, turn the Image

 

 

Display off if it is on.

 

 

 

 

 

The batteries

Replace or recharge the batteries.

 

are drained.

 

 

 

 

 

 

Images in the

Remove the memory card.

 

memory card

 

 

 

may be

 

 

 

corrupted.

 

 

 

 

 

 

The camera

Reset the camera by holding the

 

has stopped

switch in the ON

 

operating.

position until the Image Display

 

 

turns on.

 

 

 

 

 

Chapter 7: Troubleshooting and support

77