HP 5500, 7500, CRT, 9500, mx704, 7550 manual Setting Up the Monitor

Installation

2. Push the base toward the front of the monitor until it stops.

Setting Up the Monitor

Before setting up the monitor, place it in a convenient, well- ventilated location near your computer.

1.Turn off the power to your computer and other peripheral devices.

2.Connect the video cable (blue connector) 1 from the back of the monitor to the blue 15-pin connector on the back of the computer. Tighten the cable screws to secure the cable to the connector.

CAUTION: To avoid damaging the video cable, ensure that the cable aligns with the 15-pin connector. Do not force the cable onto the connector.

3-2 Reference Guide