HP 7500, CRT, 9500, mx704, 7550, 5500 manual Problem, Possible Cause, Solution, Troubleshooting

Troubleshooting

Problem	Possible Cause	Solution
	Monitor may have been moved	Press the SELECT
	or inadvertently bumped.	button to access the
		On-Screen Display.
		Select Degauss to
		activate.
		Hewlett-Packard
		suggests you not
		degauss more than
		once within a
		30-minute period of
		time.
Image is too large or too Horizontal width may need		Press the SELECT
small.	adjustment.	button to access the
		On-Screen Display.
		Select H. Size to
		adjust as needed.
	Vertical height may need	Press the SELECT
	adjustment.	button to access the
		On-Screen Display.
		Select V. Size to
		adjust as needed.
Image is not centered.	Horizontal position may need	Press the SELECT
	adjustment.	button to access the
		On-Screen Display.
		Select H. Position to
		adjust as needed.
	Vertical position may need	Press the SELECT
	adjustment.	button to access the
		On-Screen Display.

Select V. Position to adjust as needed.

A-2 Reference Guide