Whirlpool 8ET8MTKXKT00 manual Trouble Shooting, Moving, Your refrigerator will not operate

Models: 8ET8MTKXKT00

1 27
Download 27 pages 54.34 Kb
Page 23
Image 23
Moving

Moving

When you are moving your refrigerator to a new home, follow these steps to prepare it for the move.

1.If your refrigerator has an automatic ice maker:

Turn off the water supply to the ice maker at least one day ahead of time.

Disconnect the water line from the back of the refrigerator.

When the last load of ice drops, raise the ice maker arm to the OFF (up) position.

2.Remove all food from the refrigerator and pack all frozen food in dry ice.

3.Depending on your model, turn the Thermostat Control (or Refrigerator Control, depending on the model) to OFF. See the “Setting the Controls” section.

4.Unplug the refrigerator.

5.Empty water from the defrost pan.

6.Clean, wipe, and dry thoroughly.

7.Take out all removable parts, wrap them well, and tape them together so they don’t shift and rattle during the move.

8.Depending on the model, raise the front of the refrigerator so it rolls more easily OR screw in the leveling legs so they don't scrape the floor. See the "Door Closing" section.

9.Tape the doors shut and the power cord to the refrigerator cabinet.

When you get to your new home, put everything back and refer to the “Installing Your Refrigerator” section for preparation instructions. Also, if your refrigerator has an automatic ice maker, remember to reconnect the water supply to the refrigerator.

TROUBLE-

SHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Your refrigerator will not operate

Is the power supply cord unplugged?

Firmly plug the cord into a live outlet with proper voltage.

Has a household fuse or circuit breaker tripped? Replace the fuse or reset the circuit.

Is the Refrigerator Control turned to the “OFF” position?

Refer to the “Setting the Controls” section.

Is the refrigerator defrosting?

Recheck to see if the refrigerator is operating in 30 minutes. Your refrigerator will regularly run an automatic defrost cycle.

The lights do not work

Is the power supply cord unplugged?

Firmly plug the cord into a live outlet with proper voltage.

Is a light bulb loose in the socket?

Turn the refrigerator control to OFF. Disconnect the refrigerator from the electrical supply. Gently remove the bulb and reinsert. Then reconnect the refrigerator to the electrical supply and reset the refrigerator control.

Has a light bulb burned out?

Replace with an appliance bulb of the same wattage, size, and shape. See the “Changing the Light Bulbs” section.

There is water in the defrost drain pan

Is the refrigerator defrosting?

The water will evaporate. It is normal for water to drip into the defrost pan.

Is it more humid than normal?

Expect that the water in the defrost pan will take longer to evaporate. This is normal when it is hot or humid.

23

Page 23
Image 23
Whirlpool 8ET8MTKXKT00 manual Trouble Shooting, Moving, Your refrigerator will not operate, The lights do not work